Changing Rear Cross Wheel Rim
Changing Rear Cross Wheel Rim
Instructions for Changing Rear Cross Wheel Rim:
- Deflate air from tire
- Loosen the 15mm nuts on the end of the axle
- Remove wheel from bike frame
- Remove disc rotor from rear rim (unthreads anti clockwise)
- Loosen the 1.5mm grub screw. Remove 46mm round nut from behind the disc. If you donโt have a spanner large enough you can use a vice to get the thread started.
ย
- Pull axle through the rim pulling from the driver side.
- Remove 4x bolts from rim to split the rim.
- The 15mm nut sits on the outside and the cone shaped nut sits against the hub
